Cart:

0 item(s) - ZAR0.00
You have no items in your shopping cart.

0

Welcome to our online store!

KC1000

ZAR8,074.80

Quick Overview

KC1000 NVMe PCIe SSD 960GB, HHHL
Only 1 left

Availability: In stock

KC1000 is available for purchase in increments of 1
OR
Share |

Details

Exceptional performance for systems with NVMe support.

Kingston’s KC1000 solid-state drive is a high-performance PCIe NVMe™ solution that is over 2x faster than SATA-based SSDs and 40x faster than a 7200RPM hard-disk drive*. Using a PCIe Gen 3.0 x4 interface and an 8-channel Phison PS5007-E7 controller, this drive features 8 cores and 2x the DRAM to help power users blaze through even the toughest projects with high-speed data transfers of up to 2500MB/s*.

KC1000 uses native OS drivers and is NVMe 1.2 compliant which allows users to take full advantage of the high throughput, IOPS and low latency that is available to systems that support NVMe. This protocol was designed specifically to support Flash-based storage versus SATA, which was developed for traditional spinning disks. It removes performance bottlenecks and provides the system with instant access to the device once the SSD is installed.

KC1000 is easily installed in either a standard M.2 or PCI Express socket using the M.2 2280 or the half-height, half-length add-in card for greater design-in flexibility when used by system builders. There is a range of capacities available from
240GB to 960GB**, and the KC1000 is backed by a limited five-year warranty*** and legendary Kingston support.

- High-performance, next-generation PCIe NVMe SSD
- NVMe — Designed for SSDs, not legacy storage products
- Form factor choices to fit a wide range of systems

* Based on “out-of-box performance” using a SATA Rev. 3.0 motherboard. Speed may vary due to host hardware, software and usage. IOMETER random 4K random read/write is based on an 8GB partition.

** Some of the listed capacity on a Flash storage device is used for formatting and other functions and is thus not available for data storage. As such, the actual available capacity for data storage is less than what is listed on the products. For more information, go to Kingston’s Flash Memory Guide at Kingston.com/flashguide.

*** Limited warranty based on 5 years or “SSD Life Remaining” which can be found using the Kingston SSD Manager (Kingston.com/SSDManager). A new, unused product will show a wear indicator value of one hundred (100), whereas a product that has reached its endurance limit of program erase cycles will show a wear indicator value of one (1). See Kingston.com/wa for details.
Weight & dimensions
Weight 76 g
Depth 181 mm
Width 121 mm
Height 21.6 mm
Operational conditions
Operating temperature (T-T) 0 - 70 °C
Storage temperature (T-T) -40 - 85 °C
Operating vibration 2.17 G
Non-operating vibration 20 G
Power
Power consumption (read) 4.95 W
Power consumption (write) 7.4 W
Power consumption (idle) 0.11 W
Packaging data
Package type Box
Other features
Product colour Black
Features
Read speed 2700 MB/s
Write speed 1600 MB/s
SSD capacity 960 GB
Mean time between failures (MTBF) 2000000 h
Certification FCC, VCI
Memory type MLC
Windows operating systems supported Y
Mac operating systems supported Y
Linux operating systems supported Y
RoHS compliance Y
PCI Express interface data lanes x4
SSD form factor HHHL
Maximum read (4KB) 290000 IOPS
Maximum write (4KB) 190000 IOPS
PCMARK Vantage HDD Suite Score 150000
Controller type Phison PS5007-E7
Processor cores 8
NVMe version 1.2
Component for PC/notebook
Interface PCI Express 3.0
PCI Express CEM revision 2.0

Additional Information

Description Exceptional performance for systems with NVMe support.

Kingston’s KC1000 solid-state drive is a high-performance PCIe NVMe™ solution that is over 2x faster than SATA-based SSDs and 40x faster than a 7200RPM hard-disk drive*. Using a PCIe Gen 3.0 x4 interface and an 8-channel Phison PS5007-E7 controller, this drive features 8 cores and 2x the DRAM to help power users blaze through even the toughest projects with high-speed data transfers of up to 2500MB/s*.

KC1000 uses native OS drivers and is NVMe 1.2 compliant which allows users to take full advantage of the high throughput, IOPS and low latency that is available to systems that support NVMe. This protocol was designed specifically to support Flash-based storage versus SATA, which was developed for traditional spinning disks. It removes performance bottlenecks and provides the system with instant access to the device once the SSD is installed.

KC1000 is easily installed in either a standard M.2 or PCI Express socket using the M.2 2280 or the half-height, half-length add-in card for greater design-in flexibility when used by system builders. There is a range of capacities available from
240GB to 960GB**, and the KC1000 is backed by a limited five-year warranty*** and legendary Kingston support.

- High-performance, next-generation PCIe NVMe SSD
- NVMe — Designed for SSDs, not legacy storage products
- Form factor choices to fit a wide range of systems

* Based on “out-of-box performance” using a SATA Rev. 3.0 motherboard. Speed may vary due to host hardware, software and usage. IOMETER random 4K random read/write is based on an 8GB partition.

** Some of the listed capacity on a Flash storage device is used for formatting and other functions and is thus not available for data storage. As such, the actual available capacity for data storage is less than what is listed on the products. For more information, go to Kingston’s Flash Memory Guide at Kingston.com/flashguide.

*** Limited warranty based on 5 years or “SSD Life Remaining” which can be found using the Kingston SSD Manager (Kingston.com/SSDManager). A new, unused product will show a wear indicator value of one hundred (100), whereas a product that has reached its endurance limit of program erase cycles will show a wear indicator value of one (1). See Kingston.com/wa for details.
Weight & dimensions
Weight 76 g
Depth 181 mm
Width 121 mm
Height 21.6 mm
Operational conditions
Operating temperature (T-T) 0 - 70 °C
Storage temperature (T-T) -40 - 85 °C
Operating vibration 2.17 G
Non-operating vibration 20 G
Power
Power consumption (read) 4.95 W
Power consumption (write) 7.4 W
Power consumption (idle) 0.11 W
Packaging data
Package type Box
Other features
Product colour Black
Features
Read speed 2700 MB/s
Write speed 1600 MB/s
SSD capacity 960 GB
Mean time between failures (MTBF) 2000000 h
Certification FCC, VCI
Memory type MLC
Windows operating systems supported Y
Mac operating systems supported Y
Linux operating systems supported Y
RoHS compliance Y
PCI Express interface data lanes x4
SSD form factor HHHL
Maximum read (4KB) 290000 IOPS
Maximum write (4KB) 190000 IOPS
PCMARK Vantage HDD Suite Score 150000
Controller type Phison PS5007-E7
Processor cores 8
NVMe version 1.2
Component for PC/notebook
Interface PCI Express 3.0
PCI Express CEM revision 2.0

Video URL N/A
icecatcode SKC1000H/960G

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.